E. Rissler

Rissler 18" Taper Board Conveyors

FEATURES:

  • Simple Installation
  • Simple Maintenance
  • #55 or #62 Steel Detachable Chain
  • Adjustable Slip Clutch
  • Cast Sprockets
  • Greasable Bearings
  • Painted Exterior Surfaces
  • Conveyor available up to 130 ft. long
  • Feeder available up to 150 ft. long

18” DRIVE UNIT: Includes double reduction, adjustable slip clutch, greaseable bearings and cast sprockets.

WOOD CONVEYOR SECTION: 18” wide, 9 1/4” high with 3 coats of polyurethane on surface in contact with feed and painted on exterior surface. Oak or poly rails, #55 or #62 detachable chain and oak or poly flights. Priced per foot. Maximum length 130'.

WOOD TAPER BOARD FEEDER: 18” wide, 91/4” high with 3 coats of polyurethane on surface in contact with feed and painted on exterior surface. Oak or poly rails #55 or #62 detachable chain and oak or poly flights. Priced per foot. Maximum length 150'.

24” DRIVE UNIT: Includes double reduction, heavy duty adjustable slip clutch, greaseable bearings, and cast sprockets.

WOOD CONVEYOR SECTION: 24” wide, 91/4” high with 3 coats of polyurethane on surface in contact with feed and painted on exterior surface. Oak or poly rails, #62 detachable chain and poly flights. Priced per foot. Maximum length 100'.

SPECIAL TOP DELIVERY CONVEYOR: 6” high sides above top floor. Priced per foot. 12” high, #55 or #62 chain with poly flights.

DRIVE FOR SPECIAL TOP DELIVERY: Motor mount top and bottom.

OPTIONS:

HOPPER: Wood construction, 25”, 31” or 37” wide, 34” long and 11 1/2” high.

INCLINE HARDWARE: Steel hold-down shoes with poly wear down slides. Maximum 45 degrees. Field installed.

PRECUT INCLINES AND DECLINES

DECLINE SIDES: 4 poly side, field installed.

DROP-OUT: 12”, 15”, or 18” wide with slide rails. Field installed.

COVER: Stainless. Priced per 10' section. 18” conveyor or feeder only.

TOP FLOOR: Allows for conveying feed on both upper and lower feeders. Priced per foot.

SECTION CONNECTING IRONS: Angle irons with bolts, painted blue. Priced per piece.

FLARE BOARD: Required at each hopper, between each hopper or between hopper and incline.

Rissler 18" Top & Bottom Delivery Conveyors

FEATURES:

  • Simple Installation
  • Simple Maintenance
  • #55 or #62 Steel Detachable Chain
  • Adjustable Slip Clutch
  • Cast Sprockets
  • Greasable Bearings
  • Painted Exterior Surfaces
  • Conveyor available up to 130 ft. long
  • Feeder available up to 150 ft. long

18” DRIVE UNIT: Includes double reduction, adjustable slip clutch, greaseable bearings and cast sprockets.

WOOD CONVEYOR SECTION: 18” wide, 9 1/4” high with 3 coats of polyurethane on surface in contact with feed and painted on exterior surface. Oak or poly rails, #55 or #62 detachable chain and oak or poly flights. Priced per foot. Maximum length 130'.

WOOD TAPER BOARD FEEDER: 18” wide, 91/4” high with 3 coats of polyurethane on surface in contact with feed and painted on exterior surface. Oak or poly rails #55 or #62 detachable chain and oak or poly flights. Priced per foot. Maximum length 150'.

24” DRIVE UNIT: Includes double reduction, heavy duty adjustable slip clutch, greaseable bearings, and cast sprockets.

WOOD CONVEYOR SECTION: 24” wide, 91/4” high with 3 coats of polyurethane on surface in contact with feed and painted on exterior surface. Oak or poly rails, #62 detachable chain and poly flights. Priced per foot. Maximum length 100'.

SPECIAL TOP DELIVERY CONVEYOR: 6” high sides above top floor. Priced per foot. 12” high, #55 or #62 chain with poly flights.

DRIVE FOR SPECIAL TOP DELIVERY: Motor mount top and bottom.

OPTIONS:

HOPPER: Wood construction, 25”, 31” or 37” wide, 34” long and 11 1/2” high.

INCLINE HARDWARE: Steel hold-down shoes with poly wear down slides. Maximum 45 degrees. Field installed.

PRECUT INCLINES AND DECLINES

DECLINE SIDES: 4 poly side, field installed.

DROP-OUT: 12”, 15”, or 18” wide with slide rails. Field installed.

COVER: Stainless. Priced per 10' section. 18” conveyor or feeder only.

TOP FLOOR: Allows for conveying feed on both upper and lower feeders. Priced per foot.

SECTION CONNECTING IRONS: Angle irons with bolts, painted blue. Priced per piece.

FLARE BOARD: Required at each hopper, between each hopper or between hopper and incline.

Rissler 11" Single Chain Conveyors

FEATURES:

  • Simple Installation
  • Simple Maintenance
  • #55 or #62 Steel Detachable Chain
  • Adjustable Slip Clutch
  • Cast Sprockets
  • Greasable Bearings
  • Painted Exterior Surfaces
  • Conveyor available up to 130 ft. long
  • Feeder available up to 150 ft. long

DRIVE UNIT: Double reduction.

WOOD CONVEYOR SECTION: 11” wide with 3 coats of polyurethane on surface in contact with feed and painted on exterior. #55 or #62 detachable chain and oak or poly slats. Priced per foot.

HOOPER: Wood construction.

COVER: Stainless. Priced per 10' section.

OPTIONS:

HOPPER: Wood construction, 25”, 31” or 37” wide, 34” long and 11 1/2” high.

INCLINE HARDWARE: Steel hold-down shoes with poly wear down slides. Maximum 45 degrees. Field installed.

PRECUT INCLINES AND DECLINES

DECLINE SIDES: 4 poly side, field installed.

DROP-OUT: 12”, 15”, or 18” wide with slide rails. Field installed.

COVER: Stainless. Priced per 10' section. 18” conveyor or feeder only.

TOP FLOOR: Allows for conveying feed on both upper and lower feeders. Priced per foot.

SECTION CONNECTING IRONS: Angle irons with bolts, painted blue. Priced per piece.

FLARE BOARD: Required at each hopper, between each hopper or between hopper and incline.

Return to Conveyors